Setup Guide

This section covers asset import, vehicle setup, and wheel configuration.

Start with Getting Started to import the asset and configure your project, then see Setup Guides for detailed wheel configuration.

Sample Prerequisites

Before starting with NWH Wheel Controller 3D, import the required samples:

Important

NWH Common Package > Common Base Sample must be imported first. This sample is required for all NWH package samples to function properly.

Samples are imported via Package Manager > In Project > NWH Wheel Controller 3D > Samples.

Note

Samples are found in the Package Manager under the "In Project" category in the left sidebar, NOT under "My Assets" or other categories.

Getting Started

Start here to install the asset and prepare your project:

  • Importing - Install the asset via Package Manager or Unity package, configure build settings and input system
  • Quick Start - Get a vehicle up and running in minutes using the setup wizard or manual configuration steps

Setup Guides

Detailed guides for configuring specific aspects of Wheel Controller 3D:

  • Wheel Controller - Configure wheel physics, suspension, damping, and friction
  • Input - Set up input handling and vehicle controls
  • Fixing Model Rotation - Troubleshoot and fix model orientation and pivot point issues